Ritik THC 1.4

Features:

• Fully standalone Plasma Torch Height Control
• Controls the Z axis directly and independently of the CNC Control
• Microcontroller based digital design
• Separate Voltage Divider and control units to avoid Plasma Noise. Works with HF pilot based Plasma Power Sources
• Stepper / Servo motor based Z Axis control for higher precision and higher resolution with acceleration. Does not offer DC based motor control.
• Dual Speed Initial Height Sensing for both Ohmic and Floating switch based Ihs.
• Advanced PID loop for dynamic correction during Automatic mode
• Adjustable pierce height and cut height in 0.1 mm intervals
• Dynamically adjust pierce height
• Dual IHS – Ohmic and Proxy Switch based. (floating)
• 1 Volt accuracy (+- 0.5v )
• Settable pierce delay in 0.1 sec intervals
• Able to cut Corrugated Steel
• User Adjustable dead band adjustable in 0.5 volt to avoid over corrections
• User Adjustable AVC Response time
• User settable Proxy switch based offset for Floating switch IHS
• User adjustable Z Axis speed with acceleration and deceleration for smooth operation and to reduce cycle time
• User definable slow speed for Ohmic IHS to protect plasma torch, shield and nozzle.
• User definable speed change over location
• User definable partial raise height to reduce the cycle time
• User definable full retract delay to protect the plasma torch from accidental damages during plate loading / unloading
• User definable correction speed during Automatic mode
• Full diagnosis of Input and Output signals for quick interfacing
• Several user settable parameters: 4 Line (20×4) Backlight LCD display